11.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

16.00 USD

This Curious George birthday party hat will have your guests swinging from the trees!

Handcrafted with a fun Curious George fabric. Each crown is lined with a thick interfacing and backed with your color choice of eco friendly felt. These are sturdy crowns that will last through hours of celebrating and then can be used again and again for those who want to monkey around a little more.

Customize your crown with your child's age or choose "no age" during checkout.

Not just for little monkeys. These crowns come with a coordinating grosgrain ribbon that allows this birthday crown to adjust to fit adult monkey's too.

Listing is for one crown. Discount given for orders over 6, please convo.

All orders ship out within 48 hours.




>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

11.00 USD

Make your own clay molds, using only hot water. This will be one of your best purchases ever.
1 box 6 pcs single color (clear white, size: 5/8 x 1/4 x 2 1/4 inches per piece).

If you have never used Oyumaru before, watching this video will give you an idea on how easy it is to make your own mold: http://www.youtube.com/watch?v=vz8FwUEFMzY (this site is not related to sourceheleper in any way)

Great clay molding material which is re-usable, so you can keep using it for different mold shapes.

Perfect if you need to make lots of clay molds but only need to use each to create few copies. Picks up detail surprisingly well.

Dip a piece of the Oyumaru in hot water (approx: 80 degree C) for about 3 to 5 minutes. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel. While it is still soft, press the material you wish to mold into the Oyumaru.

If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.

Allow Oyumaru to cool down, remove your object and your mold is ready for your clay project. Oyumaru is re-usable.

Note: by the way, if you do not need this material anymore, you can make various 1:12 miniature items with this material

Please let me know if you are interested to purchase in quantity for re-sale in your area.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

9.99 GBP

12 sheets of A4 wafer paper 'Peaches & Cream' set

Set contains x 2 of each design and there are 6 designs in the set.

This wafer paper is 0.44mm thick and printed with edible ink. Fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations! It is possible to use this as a cake wrap with slight overlap for repetitive pattern. Also, if you would prefer a set with 12 sheets of just one of the patterns in the set shown then just let me know and I will produce that for you.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is not noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

7.00 GBP

We design and make high quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

8.00 USD

This adorable fox mask is the perfect accessory for all ages. With its quality contruction and classic design, this fox mask will withstand hours of adventure and fun.

Many color combinations to choose or create your own by choosing "Custom Colors". Include your color choices during checkout.

All i Crown You masks have been designed and crafted with quality in mind.
Each mask is made with a double layer of eco friendly felt and is lined with thick interfacing that gives this mask strength and durability to withstand endless hours of fun. Large, properly placed eye openings allow for unobstructed viewing and an elastic band to give a secure, comfortable fit.

Discounts given on 6 or more. Please send convo.

As always, FREE DOMESTIC SHIPPING.

a SWEET MONICA CELEBRATIONS design, copyrighted, 2014-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator.All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

9.99 GBP

Struggling to apply thin stripes of fondant to the sides of a cake? taking forever? Bored of using that set square to make sure that every SINGLE stripe is applied perfectly vertical? Well I know I am! That's why I've invented these babies - 12 sheets of A4 wafer paper, blush pink and white 'Candy Stripes'. These designs are continuous in nature and suitable for pattern matching and wrapping around your cake tiers (phew!). COMES WITH A FREE WRITTEN APPLICATION TUTORIAL!

Set contains x 12 sheets.

This wafer paper is 0.44mm thick and printed with edible ink. Fantastic for making wraparound designs on cake tiers, cupcake toppers, cookie toppers, even setting in candy lollypops for your baby shower!

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x

7.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

16.00 USD

Celebrate your next birthday party in style with Peppa Pig, George Pig and friends.

These reusable felt crowns are made with eco-fi felt and lined to give them structure and durability. A generous grosgrain ribbon is secured by two nickel grommets for a secure, comfortable fit.

C H A R A C T E R S:
Peppa Pig (3 Choices)
George Pig
Mummy Pig
Daddy Pig
Zoe Zebra
Suzy Sheep
Candy Cat
Pedro Pony
Emily Elephant
Rebecca Rabbit
Richard Rabbit
Danny Dog

S I Z E:
One size fits children and adults.

Q U A N I T Y:
Listing is for one crown in your choice of character.
Discounts given on orders of 6 or more crown. Send request.

S H I P P I N G:
All orders ship within 2 business days.
Free USPS First Class shipping.
Shipping upgrades available.

C U S T O M I Z A T I O N:
Felt and ribbon colors can be changed to suit your party theme.


>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

16.00 USD

SUGARCRAFT - Hairdressing theme design - The Art of Cake Dressing

Decorate your cakes, cupcakes, or cookies using this hairdressing theme design mold.

The next picture shows an example of a cookie/cupcake topping idea.

This mold is produced using a silicone system specially formulated for use in the food and confectionery industry and complies to FDA (Food and Drugs Agency) regulations in the USA.

This detail and flexible mold is reusable.

The mold diameter is 75 mm (approximately 3 inches). Thickness = approximately 5/16 inch.
Individual: Comb: 1 1/8 inch, scissor; 1 1/4 inch high, 5/8 inch wide; Mirror: 1 1/4 inch high, 3/4 inch wide; Hairdryer: 3/4 inch x 7/8 inch

This mold is ideal for use with sugarpaste, flowerpaste, chocolate sugarpaste, marzipan, or melted chocolate.

This mold is also suitable for craft applications and can be used with most mediums including paper clay, metal clay, fimo, resin and plaster. Once used with non-edible materials, we advice not to use with food products.

Mold comes with simple instruction to use.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

9.99 GBP

12 sheets of A4 wafer paper 'Pretty Peonies' WRAPAROUND set. These patterns have been designed specifically for wrapping around cakes and have been patterned matched for a perfect, continuous flow. Written application tutorial included for free.

This wafer paper is 0.44mm thick and printed with edible ink. Also fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

SHEET GUIDE FOR APPLICATION OF WRAPAROUNDS ON ROUND TIERS

Please note this is a rough guide, calculated on the basis of Pi, using the length of A4 at 11.6” when in landscape position. [Whilst I have not measured allowing for excess circumference after fondant application, I have added an allowance within the sheets needed column to ensure that you will have enough sheets to wrap your cake.]

CAKE WIDTH IN INCHES APPROXIMATE AMOUNT OF SHEETS NEEDED

16" 4.5
15" 4.25
14" 4
13" 3.75
12" 3.5
11" 3.25
10" 3
9" 2.75
8" 2.5
7" 2.25
6" 2
5" 1.75
4" 1.5

Sheets fit up to 8" in height extended tiers.


I can offer customised sets therefore if you would prefer a set with 12 sheets of just one of the patterns in the set shown then just let me know and I will produce that for you.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is NOT noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

10.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

18.00 USD

Celebrate your next birthday party in style with this adorable party hat featuring Mickey Mouse.

This fun Mickey Mouse birthday crown is made using eco-fi felt and embellished with our friend, Mickey.
A generous grosgrain ribbon adjusts to allow your crown to comfortably fit any head size...all Mickey Mouse Club members can wear them!

Listing is for one crown.
Discounts given on orders of 6 or more.



>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

10.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

11.00 USD

Make your own clay molds, using only hot water. This will be one of your best purchases ever.
1 box 6 pcs single color (clear white, size: 5/8 x 1/4 x 2 1/4 inches per piece).

If you have never used Oyumaru before, watching this video will give you an idea on how easy it is to make your own mold: http://www.youtube.com/watch?v=vz8FwUEFMzY (this site is not related to sourceheleper in any way)

Great clay molding material which is re-usable, so you can keep using it for different mold shapes.

Perfect if you need to make lots of clay molds but only need to use each to create few copies. Picks up detail surprisingly well.

Dip a piece of the Oyumaru in hot water (approx: 80 degree C) for about 3 to 5 minutes. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel. While it is still soft, press the material you wish to mold into the Oyumaru.

If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.

Allow Oyumaru to cool down, remove your object and your mold is ready for your clay project. Oyumaru is re-usable.

Note: by the way, if you do not need this material anymore, you can make various 1:12 miniature items with this material

Please let me know if you are interested to purchase in quantity for re-sale in your area.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

7.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

12.00 USD

Vintage Trifari Brooch featuring a silver toned plate setting with blue sapphire color rhinestones and a white rhinestone set at the top of the brooch
Signed Trifari on back this brooch showcases the craftmanship of the Trifari name.
Excellent vintage condition -
Measures 2 X 1 1/2 inches

16.00 USD

These wonderful sock monkey crowns will have everyone swinging from your trees! Use them as party favors for your next sock monkey birthday or as a fun reading prop during story telling. Your young reader will love it.

Each crown is made with this fabulous monkey fabric, lined with a thick interlining and backed with your choice of red or blue eco friendly felt. Two nickel grommets secure a generous grosgrain ribbon, allowing this crown to adjust to any head size ... one size fits all monkey's.

You will be happy with the quality of my crowns and the best part is that they can be used over and over again.

Made for fun, made to last and made in the USA.

One crown per order. Discounts given for orders over 4. Send a convo.

__________________________________________________

a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

11.00 USD

Make your own clay molds, using only hot water. This will be one of your best purchases ever.
1 box 6 pcs single color (clear white, size: 5/8 x 1/4 x 2 1/4 inches per piece).

If you have never used Oyumaru before, watching this video will give you an idea on how easy it is to make your own mold: http://www.youtube.com/watch?v=vz8FwUEFMzY (this site is not related to sourceheleper in any way)

Great clay molding material which is re-usable, so you can keep using it for different mold shapes.

Perfect if you need to make lots of clay molds but only need to use each to create few copies. Picks up detail surprisingly well.

Dip a piece of the Oyumaru in hot water (approx: 80 degree C) for about 3 to 5 minutes. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel. While it is still soft, press the material you wish to mold into the Oyumaru.

If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.

Allow Oyumaru to cool down, remove your object and your mold is ready for your clay project. Oyumaru is re-usable.

Note: by the way, if you do not need this material anymore, you can make various 1:12 miniature items with this material

Please let me know if you are interested to purchase in quantity for re-sale in your area.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

10.50 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.