Quantcast
Channel: Shops recently added to CounterFitCakes'
Viewing all 11358 articles
Browse latest View live

Pack of 12 x A4 sheets of printed wafer paper - 'Pretty Peonies' WRAPAROUND set by LaDolceVitaCakes

$
0
0

9.99 GBP

12 sheets of A4 wafer paper 'Painted Peonies' WRAPAROUND set. These patterns have been designed specifically for wrapping around cakes and have been patterned matched for a perfect, continuous flow. Written application tutorial included for free.

This wafer paper is 0.44mm thick and printed with edible ink. Also fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

SHEET GUIDE FOR APPLICATION OF WRAPAROUNDS ON ROUND TIERS

Please note this is a rough guide, calculated on the basis of Pi, using the length of A4 at 11.6” when in landscape position. [Whilst I have not measured allowing for excess circumference after fondant application, I have added an allowance within the sheets needed column to ensure that you will have enough sheets to wrap your cake.]

CAKE WIDTH IN INCHES APPROXIMATE AMOUNT OF SHEETS NEEDED

16" 4.5
15" 4.25
14" 4
13" 3.75
12" 3.5
11" 3.25
10" 3
9" 2.75
8" 2.5
7" 2.25
6" 2
5" 1.75
4" 1.5

Sheets fit up to 8" in height extended tiers.


I can offer customised sets therefore if you would prefer a set with 12 sheets of just one of the patterns in the set shown then just let me know and I will produce that for you.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is NOT noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!


Pencil and Crayon Cutter Cookie Cutter and Fondant Cutter Designed by The Painted Pastry - **Guideline Sketch to Print Below** by WhiskedAwayCutters

$
0
0

5.50 USD

For Teacher Appreciation or Back to School cookies, we have this Pencil and Crayon Cutter design by Aime of The Painted Pastry. You can find more of Aime's delightful work at www.facebook.com/ThePaintedPastry

I will be adding a Guideline Sketch soon should anyone wish to use it as a guide. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Stag silicone mould (mold) - 'Stag's Head' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C190 by fpcsugarcraft

$
0
0

13.50 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Child's Witch Hat - Classic Witch Hat - Black Felt Witch Hat by iCROWNyou

$
0
0

52.00 USD

A classic, child's witch hat. The perfect witch costume for the little witch in training.

This hat is a thick, high quality child's witch hat with all the detailing to make it a classic.
Each hat is handcrafted using eco-fi felt (very earth friendly as Witches generally are). The brim is embellished with a 3" wide, black satin ribbon that ties into a generous bow.
The top of the hat has the unique "crookedness" ... another detail that a true witch hat must have and a classic droopy brim, of course.

Black satin ribbon ties are added to your witch hat for added security incase it's a windy nights ride.


H A T S I Z I N G :

Small Hat : 18 1/2" - 20 "
Medium Hat : 20 1/2" - 22"


S H I P P I N G :

Due to the size of the witch hat, your costume will arrive in a 12 x 12 x12 box. Please be aware of shipping charges to your destination prior to placing your order.

I normally ship out within 5 days after receiving an order, however, please allow up to two weeks to receive your order.


Matching Cape:
www.etsy.com/listing/201975769/childs-witch-hat-and-cape-childs-witch


A special "thank you" to Kim Reilly from Studio K Photography for the wonderful pictures. She is amazing! http://kimreilly.smugmug.com/



a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2014 ©
all rights reserved ®
my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. Thank you.

Food Grade Mold (M61) - Hairdressing Theme Design - Flexible Cake Decorating Mold - Reusable - The Art of Cake Dressing by SourceHelper

$
0
0

16.00 USD

SUGARCRAFT - Hairdressing theme design - The Art of Cake Dressing

Decorate your cakes, cupcakes, or cookies using this hairdressing theme design mold.

The next picture shows an example of a cookie/cupcake topping idea.

This mold is produced using a silicone system specially formulated for use in the food and confectionery industry and complies to FDA (Food and Drugs Agency) regulations in the USA.

This detail and flexible mold is reusable.

The mold diameter is 75 mm (approximately 3 inches). Thickness = approximately 5/16 inch.
Individual: Comb: 1 1/8 inch, scissor; 1 1/4 inch high, 5/8 inch wide; Mirror: 1 1/4 inch high, 3/4 inch wide; Hairdryer: 3/4 inch x 7/8 inch

This mold is ideal for use with sugarpaste, flowerpaste, chocolate sugarpaste, marzipan, or melted chocolate.

This mold is also suitable for craft applications and can be used with most mediums including paper clay, metal clay, fimo, resin and plaster. Once used with non-edible materials, we advice not to use with food products.

Mold comes with simple instruction to use.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

Special Order for Bee by WhiskedAwayCutters

$
0
0

22.25 USD

This listing is for a special order for Bee for the following cutters:

2 7/8" Pumpkin 3 - $5.75
3" Pumpkin 1 - $5.00
2 3/4" Wonky Star - 5.75
3" LilaLoa - $5.75
Subtotal for the four cutters $22.25. Shipping for the four cutters has been calculated and is shown.

Thank you, Bee!

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current orders will ship within 1 - 3 days. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Kangaroo silicone mould (mold) - 'Kangaroo & Boomerang' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold Z008 by fpcsugarcraft

$
0
0

8.00 GBP

We design and make high quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Felt Owl Mask - Halloween Owl Costume - Pretend Play Costume - Owl Party Masks by iCROWNyou

$
0
0

12.00 USD

This felt owl mask is the perfect pretend play accessory for big imaginations. Use them for Halloween,school plays, pretend play, parties ... wherever fun and adventure is wanted.

Made with two layers of Eco-friendly felt and lined with a thick interfacing. This owl mask is very sturdy and is made to use over and over again.

All I Crown You masks boast playful designs, extra large eye openings (better to see you with my dear), nickel grommets and elastic to keep them in place. Soft, comfortable and one size to fit all.

C O L O R S:
Choose from the list above or create your own by selecting "Custom Colors" and add your colors during checkout.

S I Z E:
One Size Fits All

S H I P P I N G:
Orders ship within 3 days and as always, FREE DOMESTIC SHIPPING?

Listing is for one mask. Discounts given on 4 or more. Please convo.



a SWEET MONICA CELEBRATIONS design, copyrighted, 2014-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.


Wire Wrapping tool - Multi Mandrel - 4 pcs set by SourceHelper

$
0
0

7.00 USD

A fabulous tool for the wire wrapper. It consists of a plastic handle paired with 4 different shaped, interchangeable plastic mandrels. Create uniquely shaped jump rings, earrings, toggles, pendants and other jewelry items. Includes handle and 4 heads (round, square, oval and triangle).

Four different shapes...One interchangeable handle...multiple possibilities! Create uniquely shaped jump rings, toggles, pendants, earrings, and other jewelry items as well as decorative home accent pieces and scrapbooking embellishments!

This package contains one 3 x 1-1/4 x 1-1/4 inch handle and four 4-3/4 inch long heads (oval, square, circle, and triangle). All pieces are plastic. Imported.

Package dimension:
Width6.75 in/17.15 cm
Height8.75 in/22.23 cm
Depth1.4 in/3.56 cm

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

We will ship your order usually within one business day after we receive you payment.

Contact us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.

To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper

Thank you - Sourcehelper.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

Wedding Dress and Mermaid Cutter Designed by The Painted Pastry - **Guideline Sketch to Print Below** by WhiskedAwayCutters

$
0
0

9.50 USD

This is truly a wonderful design by Aime of The Painted Pastry, doubling as a lovely wedding gown and as a mermaid. You can find more of Aime's delightful work at www.facebook.com/ThePaintedPastry

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. This is one such shape due to the size and intricacy of the curves.

Guideline Sketches will be following as i am still working on them.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Keyholes silicone mould (mold) - 'Keyholes' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, gothic mold, steampunk mold C150 by fpcsugarcraft

$
0
0

10.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Laguna Four Strand Faux Pearl and Crystal Necklace and Matching Earrings ~ Wedding Jewelry by Lavendergems

$
0
0

45.00 USD

Stunning and Timeless Designer Necklace and Earrings by Laguna.
Necklace features four Strands of Faux Pearls alternating with AB crystals graduating in size. There are gold bell caps on the AB crystals which give a ton of color to the crystals.
The clip-on cluster earrings are the same faux pearls and crystals and signed Laguna.
Necklace measures 18" in length and the earrings drop down 1 3/4"

Beautiful Set for a Wedding/ Bride

Curious George Birthday Crown - Curious George Party Hat - Curious George Party Decor by iCROWNyou

$
0
0

16.00 USD

This Curious George birthday party hat will have your guests swinging from the trees!

Hand crafted with a fun Curious George fabric. Each crown is lined with a thick interfacing and backed with your color choice of eco friendly felt. These are sturdy crowns that will last through hours of celebrating and then can be used again and again for those who want to monkey around a little more.

Not just for little monkeys. These crowns come with a coordinating grosgrain ribbon that allows this birthday crown to adjust to fit adult monkey's too.

Listing is for one crown. Discount given for orders over 6, please convo.

Ships out within 48 hours. Insurance included.




>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Packet of 12 x sheets of A4 coloured wafer paper - romance (pink) by LaDolceVitaCakes

$
0
0

9.99 GBP

12 sheets of A4 wafer paper 'Romance Pink' set

Set contains x 2 of each design and there are 6 designs in the set.

This wafer paper is 0.44mm thick and printed with edible ink. Fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is not noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

Christening Gown Cookie Cutter Cookie Cutter and Fondant Cutter by WhiskedAwayCutters

$
0
0

5.25 USD

Photo is coming soon! This is the graphic created from my design as part of the computer work that is entailed to take my design from the original sketch to the 3d printed image.

This listing is for the Christening Gown. Please choose from above under "Size" for either of the following:

2" x 1 1/4"
3" x 1 7/8"
3 1/2” x 2 1/4"
4” x 2 1/2”

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.


Rose silicone mould (mold) - 'Tudor Rose' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C039 by fpcsugarcraft

$
0
0

7.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Peppa Pig Iron On Patch - Embroidered Peppa Pig Applique - Ready to Ship by iCROWNyou

$
0
0

3.99 USD

Peppa Pig iron on Patch. Embroidered Peppa Pig Applique.
Adheasive backed. Iron on or sew on.

Easy to apply on apparel.
Great for patching up holes, adding to bags as fun decoration.
Add a creative touch to clothing, towels, blankets and more.

Ready to ship.

Shipping just .99 cents!

Measures: 3" x 4"




** The Copyright image of the patch belongs to their respective copyright holders.
iCrown You does not own or claim ownership of these images.**

The Miss McGoo 2 Plaque Cookie Cutter and Fondant Cutter by WhiskedAwayCutters

$
0
0

7.00 USD

This listing is for The Miss McGoo 2. Please choose from above under "Size" for either of the following:

The Miss McGoo comes in these two sizes:
Large 3 7/8" x 3 1/2"
Medium 3 3/8" x 3"

My plaque cutters are named after my friends and this one is "The Miss McGoo 2", named for the one and only, MissArty McGoo! This design is 100% Liz. After I gave her my "The Maryann" plaque at Cookie Con 2012 that I designed and had an engineer friend print on his printer, she asked if I could make one for her. It took some time for me to get my own machine, but at long last, here is The Miss McGoo! To see Arty McGoo's wonderful and truly gorgeous work, you can find her at www.artymcgoo.blogspot.com as well as www.facebook.com/ArtyMcGoo. Also very exciting, a little birdie told me (okay, it was Mr. John, her husband) that she will be travelling the country teaching as part of McGoo U, her wonderful and inspiring cookie decorating classes. You can also find McGoo U locally in Paso Robles, California. Also, keep your eyes open as she is also getting ready to launch her website. There are so many exciting things happening with the wonderful Miss McGoo!

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Artist silicone mould (mold) - 'Palette & Brush' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C071 by fpcsugarcraft

$
0
0

7.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Kenneth Lane Vintage Carved Bangle Bracelets Asian Motif by Lavendergems

$
0
0

40.00 USD

Vintage Kenneth Lane Bangle Bracelets - Carved with an Asian Motif
Beautiful colors of Coral/Cream/Black/Green/Blue and Brown
Marked inside with KJL oval.
Each 2.5" diameter about .5 wide

Excellent Condition - the blue one is cracked but still wearable. I just put that with the rest of them for free. Total of 6 Bracelets!

Viewing all 11358 articles
Browse latest View live




Latest Images