Quantcast
Channel: Shops recently added to CounterFitCakes'
Viewing all 11303 articles
Browse latest View live

Frog and More Cookie Cutter and Fondant Cutter by Drawn with Character - **Guideline Sketches to Print Below** by WhiskedAwayCutters

0
0

6.00 USD

This adorable Frog Butter was designed by my friend, the incredibly talented former Disney animator, Krista of Drawn with Character. She designed it to be a multiuse cutter, which will be shown shortly when I upload a variety of design ideas done by my friend, Maryann, The Cookie Artisan.

You can purchase the digital artwork for the frog cookie from Krista's Drawn with Character Etsy shop in her new $1 Dollar Section at: https://www.etsy.com/listing/235422341/frog-only-image-digital-stamp-coloring?ref=shop_home_active_1

You can also make the cutest cookie tags with her bag toppers found in her Drawn with Character Etsy shop at:
https://www.etsy.com/listing/232229040/were-hoppin-into-kindergarten-printable?ref=shop_home_active_2

You can find more of Krista's digital clip art at www.facebook.com/DrawnwithCharacter as well as her delightful cookies at www.facebook.com/pages/Cookies-with-Character/216082438437841

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.


Coral silicone mould (mold) - 'Coral' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold, B026 by fpcsugarcraft

0
0

11.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Vintage Rhinestone Brooch and Earrings - Signed Austria by Lavendergems

0
0

18.00 USD

Vintage Dazzling Rhinestone Brooch and Earrings
The brooch has a silver tone setting with large round and small prong set rhinestones.
The earrings are similar to the brooch but this is not a set. The earrings are clip on and are marked Austria.
Brooch measures 2 1/2 by 1 1/2 and the earrings are 1" in length.
The rhinestones are in excellent condition with lots of sparkle and shine.

Jack the Bunny Cookie Cutter with Optional Wonky Flower Tail Number 30 Number 80 Cookie Cutter - **Sketches to Print Below** by WhiskedAwayCutters

0
0

4.50 USD

Introducing Jack the Bunny! He is a jack of all trades, as it were, first sketched as a number 30, then tweaked to be an 80 as well. When I turned it, I saw with more fiddling, it could be a bunny face also! I resized The Wonky Flower as a mini and ta da! He has a optional cookie tail! I had great fun designing this cutter. Please see the photo under the main photo that shows the proportion of the bunnies to the different tail sizes.

BUNNY:
Jack the Bunny Cutter comes in five sizes to be selected from above:
2" x 1 3/4"
3" x 2 1/2"
3 1/2" x 3"
4" x 3 1/2"

MINI FLOWER:
The Mini Wonky Flower comes in these three sizes:
1"
1 1/2'
2"

I will also be including shortly Guideline Sketches should anyone wish to use them as a guide. You will find them under the photos of the cutter. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and place it on a KopyKake or alongside your cookie as you pipe. Just for clarification, Guideline Sketches are not included as hard copies with your order, but shown here to be saved to your computer to be resized as needed.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Rose silicone mould (mold) - 'Rose Border' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold E003 by fpcsugarcraft

0
0

10.00 GBP

We design and make high quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Elmo Birthday Crown - Elmo Party Hat - Sesame Street Birthday- Kids Sesame Street Birthday by iCROWNyou

0
0

14.00 USD

Celebrate your next birthday party in style with Elmo!

This fun crown is made with eco-fi felt and embellished with your choice of Elmo or Cookie monster from Sesame Street.
Grosgrain ribbon adjusts to allow these party crowns to comfortably fit any head size...the whole Family can wear them!

Elmo: blue crown / red ribbon
Cookie Monster : red crown / blue ribbon or Light Blue crown/red ribbon

PLEASE INCLUDE CROWN COLOR CHOICE IN NOTE SECTION DURING CHECKOUT.


Listing is for one crown.
Discounts given on orders of 6 or more.



>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Packet of 12 x sheets of A4 coloured wafer paper - romance (beige) by LaDolceVitaPaper

0
0

9.99 GBP

12 sheets of A4 wafer paper 'Romance Beige' set

Set contains x 2 of each design and there are 6 designs in the set.

This wafer paper is 0.44mm thick and printed with edible ink. Fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is not noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

LilaLoa's Bow Cookie Cutter and Fondant Cutter - *Guideline Sketches to Print Below* by WhiskedAwayCutters

0
0

5.50 USD

This wonderful bow design is brought to you by the very talented (and super duper creative) hand of Georganne of LilaLoa. We worked together on two versions - the regular cutter and a slightly modified design for the mini as we wanted an option for a 2" one, but did not want dough to get stuck in the tiny area between the two bottom parts of the bow that comes from sizing it down so small. You can find more of Georganne's fabulous work at www.LilaLoa.com along with oodles of how to's, tips, techniques and recipes. You also can find her post in which she uses her bow cutter along with a heart cutter that she designed for us to make, another one of our heart cutters as well as a how-to for her wonderful hibiscus cookies at http://www.lilaloa.com/2017/02/how-to-make-decorated-hibiscus-cookies.html.

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. LilaLoa's Bow is one such shape due to the intricacy of the curves. Please choose from above under "Size" for any of the following:

Cutter A:
This cutter design is shown as the cutter on the top of the photo and has space between the two tails of the bow. The first measurement is the width:
Cutter A1 - 3" x 2 5/8"
Cutter A2 - 3 1/2" x 3 1/8"

Cutter B:
This cutter design is shown as the mini on the bottom left of the photo and does not have space between the two tails of the bow as dough would get stuck in that area. It also makes for a stronger cookie as a mini. The first measurement is the width:
Cutter B: 2" x 1 3/4"

Guideline Sketches are found under the main cutter photo. These Guideline Sketches are only to be used with Whisked Away Cutters and are not authorized for other uses. To save them, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.
.
Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.


Dragon silicone mold - 'Flying Dragon' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C221 by fpcsugarcraft

0
0

10.00 GBP

Dragon silicone mold - 'Baby Dragon' by FPC Sugarcraft.

A highly detailed flying dragon, taken from our original hand sculpted wax model. Great for Game of Thrones and other Fantasy themed cakes.

We are pleased to offer you our high quality silicone moulds for sugarcraft cake decorations and other craft projects. Low cost worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Elmo Birthday Crown - Elmo Party Hat - Sesame Street Birthday- Kids Sesame Street Birthday by iCROWNyou

0
0

14.00 USD

Celebrate your next birthday party in style with Elmo!

This fun crown is made with eco-fi felt and embellished with your choice of Elmo or Cookie monster from Sesame Street.
Grosgrain ribbon adjusts to allow these party crowns to comfortably fit any head size...the whole Family can wear them!

Elmo: blue crown / red ribbon
Cookie Monster : red crown / blue ribbon or Light Blue crown/red ribbon

PLEASE INCLUDE CROWN COLOR CHOICE IN NOTE SECTION DURING CHECKOUT.


Listing is for one crown.
Discounts given on orders of 6 or more.



>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Packet of 12 x sheets of A4 coloured wafer paper - 'Innocence' WRAPAROUND set by LaDolceVitaPaper

0
0

9.99 GBP

12 sheets of A4 wafer paper 'Innocence' set, in a vintage blush pink hue.

Set contains x 4 sheets of each design as shown in gallery. ALL OF THE DESIGNS IN THIS SET ARE CONTINUOUS PATTERNS.

This wafer paper is 0.44mm thick and printed with edible ink. These patterns are continuous in nature and are suitable for wrapping around tiers - I used them in the cake featured in the photo gallery. TIP! Brush your cake with a fine even coat of piping gel and apply by slowly pushing sheet around the cake to omit any air pockets, a bit like wallpapering! (Sounds tricky but is surprisingly simple!)

If you like the shade and fancy making a matching wafer paper flower then I have matching sets of plain pink - 'BLUSH' and 'DUSK' which match perfectly with the two shades within the innocence designs! I used 'DUSK' for the flower of my cake :-)

Of course, 'Innocence' prints are also fantastic for making wafer paper flowers for your cake and cupcake creations!

[PLEASE NOTE: the design you will receive will not be blurry, as it is such a light design it is difficult to gain camera focus, a professional photographer I am not lol]

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

Mardi Gras Mask 7 Cookie Cutter & New Year's Mask 7 Cookie Cutter Designed by Ali Bee's Bake Shop - *Guideline Sketch to Print Below* by WhiskedAwayCutters

0
0

7.00 USD

This listing is for Mask 7 and is the first mask in a set of seven created by and with Ali of Ali Bee's Bake Shop based on her iconic Mardi Gras Masks cookies that she made a few years ago. Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. This shape is one such shape due to the size and intricacy of the curves.

Ali's mask cookies were either handcut or handcut and pieced together with an existing base mask cutter made by Ecrandal. Ali and I worked together to modify the base mask cutter design in order to not infringe on Ecrandal's copyright and then add on her handcut part. That is why some of the cutters look a tad different than the cookies shown. As well, we created some new ones and we hope that you like these designs! You can find more of Ali's wonderful work at www.facebook.com/AliBeesBakeShop as well as her original mask post at http://snargblog.blogspot.com/2012/02/from-vault-mardi-gras.html

For Mask 7, please choose from above under "Size" for either of the following. The width is the first measurement shown:

3 3/8" x 2 5/8"
4" x 3"

I am including a sketch below the main photo should anyone wish to use it as as guide. You will find it under the photos of the cutter. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and place it on a KopyKake to follow or place alongside your cookies as a guide.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Buttons silicone mould (mold) - 'Vintage Buttons' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C065 by fpcsugarcraft

0
0

8.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Vintage Two Toned Lucite/Thermoset Heart Necklace - Taupe/Gray by Lavendergems

0
0

10.00 USD

Who says your hearts have to be red on Valentine Day. This classy necklace is perfect for any occasion.

Necklace features ten (10) lucite hearts alternating in taupe and grey.
They are linked together and have a decorative piece separating each lucite heart.
Attached to a link chain - wear on the back of the last 2 hearts but no other wear notes.
Good Vintage condition - Measures 17 inch

Peppa Pig Birthday Hat- Peppa Pig Party Hats- George Pig Party Hat by iCROWNyou

0
0

14.00 USD

Celebrate your next birthday party in style with Peppa Pig, George Pig and friends.

These reusable felt crowns are made with eco-fi felt and lined to give them structure and durability. A generous grosgrain ribbon is secured by two nickel grommets for a secure, comfortable fit.

C H A R A C T E R S:
Peppa Pig (3 Choices)
George Pig
Mummy Pig
Daddy Pig
Zoe Zebra
Suzy Sheep
Candy Cat
Pedro Pony
Emily Elephant
Rebecca Rabbit
Richard Rabbit
Danny Dog

S I Z E:
One size fits children and adults.

Q U A N I T Y:
Listing is for one crown in your choice of character.
Discounts given on orders of 6 or more crown. Send request.

S H I P P I N G:
All orders ship within 2 business days.
Free USPS First Class shipping.
Shipping upgrades available.

C U S T O M I Z A T I O N:
Felt and ribbon colors can be changed to suit your party theme.


>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.


Packet of 12 x sheets of A4 coloured wafer paper - romance (beige) by LaDolceVitaPaper

0
0

9.99 GBP

12 sheets of A4 wafer paper 'Romance Beige' set

Set contains x 2 of each design and there are 6 designs in the set.

This wafer paper is 0.44mm thick and printed with edible ink. Fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is not noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

Scarecrow Cutter & Snowman Cutter Designed by My Nana's Nibbles - *Guideline Sketches to Print Below* by WhiskedAwayCutters

0
0

5.50 USD

We are honored to bring Chris of My Nana's Nibble's wonderful Scarecrow with a tilted hat design to cutter life after a request from a customer and Chris very kindly giving us permission to do so. Chris' cookies were scarecrows, but with a bit of computer magic I show it as a snowman too! You can find more of Chris' adorable work on FB at My Nana's Nibbles (thttps://www.facebook.com/My-Nanas-Nibbles-680299598665396/)

I am including Guideline Sketches should anyone wish to use them as a guide. You will find them under the photos of the cutter. To save them, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize them from there as needed and then print them to either follow along or to place on a KopyKake.

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. This is one such design.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Dragon Egg silicone mold - 'Dragon Egg (Large)' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C226 by fpcsugarcraft

0
0

12.50 GBP

Dragon silicone mold - 'Dragon Egg (Large)' by FPC Sugarcraft.

Use our Dragon Egg mould to make beautifully detailed cake decorations and other craft items. Great for Game of Thrones and other Fantasy themed cakes.

We are pleased to offer you our high quality silicone moulds for sugarcraft cake decorations and other craft projects. Low cost worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Dr.Seuss Birthday Crown in Read and Rhyme Fabric - Cat In The Hat Party Decoration by iCROWNyou

0
0

14.00 USD

This Dr. Seuss inspired birthday crown will get your party started even before the guests arrive!

I Crown You royal crowns are fun and whimsical. Made with fabrics from the Dr. Seuss collection

.***PLEASE NOTE: This is not a licensed Dr. Seuss Enterprise product.
It is, however, handcrafted from licensed Robert Kaufman fabric.
I am not affiliated with or sponsored by Dr. Seuss Enterprise or Robert Kaufman Fabrics .***

Each crown is lined with a thick interlining, backed with coordinating eco-friendly felt and given a generous grosgrain ribbon that allows this birthday crown to adjust to any head size.

A high quality crafted crown that is comfortable to wear and can withstand hours of fun!

IF ADDING AN AGE PLEASE INCLUDE THIS INFORMATION IN THE NOTE SECTION DURING CHECKOUT.

One crown per listing. Discounts offered on orders of 6 or more.


a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Balloon with Incorporated String Cookie Cutter - *Guideline Sketch To Print Below** by WhiskedAwayCutters

0
0

5.00 USD

This listing is for the Balloon with Incorporated String. Our tagline "Designed by a cookie decorator for cookie decorators" rings true as I needed a balloon design that did not have a bottom part that snapped off, so I designed one that incorporated a string in order to prevent breakage in shipping or on a platter as well as to create a whimsical look. I am including a sketch should anyone wish to use it as as guide. You will find it under the photos of the cutter. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and place it on a KopyKake or however you wish to use it.

The Balloon comes in the following sizes:
2" x 1 5/8"
2 1/2" x 2"
3” x 2 3/8”
3 1/2” x 2 3/4”
4" x 3 1/4"

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Viewing all 11303 articles
Browse latest View live




Latest Images