Quantcast
Channel: Shops recently added to CounterFitCakes'
Viewing all 11345 articles
Browse latest View live

Food Grade Silicone Mold - Sea Shells - for Ice, Coffee, Jelly, or Chocolate by SourceHelper

$
0
0

16.00 USD

Food Grade Silicone Tray/Mold for making ice cubes, frozen ice coffee, jelly, chocolates, candy. This mold can also be used with marsipan, sugarpaste, etc.
Mold shapes: Sea Shells

Put frozen ice coffee into your glass of iced coffee without making your iced coffee watery
Perfect for any occasions. Mold size: 7 x 7 inches
Wash thoroughly before use. Hand wash only. Food safe.

This is not a children toy.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*


Pack of 12 x A4 sheets of printed wafer paper - 'Valentines' WRAPAROUNDS by LaDolceVitaCakes

$
0
0

9.99 GBP

12 sheets of A4 wafer paper 'Valentines' WRAPAROUND set. These patterns have been designed specifically for wrapping around cakes and have been patterned matched for a perfect, continuous flow. Written application tutorial included for free.

This wafer paper is 0.44mm thick and printed with edible ink. Also fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

SHEET GUIDE FOR APPLICATION OF WRAPAROUNDS ON ROUND TIERS

Please note this is a rough guide, calculated on the basis of Pi, using the length of A4 at 11.6” when in landscape position. [Whilst I have not measured allowing for excess circumference after fondant application, I have added an allowance within the sheets needed column to ensure that you will have enough sheets to wrap your cake.]

CAKE WIDTH IN INCHES APPROXIMATE AMOUNT OF SHEETS NEEDED

16" 4.5
15" 4.25
14" 4
13" 3.75
12" 3.5
11" 3.25
10" 3
9" 2.75
8" 2.5
7" 2.25
6" 2
5" 1.75
4" 1.5

Sheets fit up to 8" in height extended tiers.


I can offer customised sets therefore if you would prefer a set with 12 sheets of just one of the patterns in the set shown then just let me know and I will produce that for you.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is NOT noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

Swirl Ice Cream Cone Cookie Cutter & Fondant Cutter - *Guideline Sketch to Print Below* by WhiskedAwayCutters

$
0
0

5.00 USD

At the encouragement of my friend, Vicki of Sweet Tweets, I am doing cutters based on past cookie designs that I had handcut and this is from a ice cream set from 2012. I have now turned it into a cutter for more definition in the shape compared to handcutting it.

I will be showing three Guideline Sketches should anyone wish to use them as as guide as soon as I can get them posted. You will find them under the photos of the cutter. To save them, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Insect silicone mould (mold) - 'Dragonfly' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold B014 by fpcsugarcraft

$
0
0

8.00 GBP

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Peppa Pig Birthday Hat- Party Crown- George Pig Party Hat by iCROWNyou

$
0
0

16.00 USD

Celebrate your next birthday party in style with Peppa Pig, George Pig and friends.

These reusable felt crowns are made with eco-fi felt and lined to give them structure and durability. A generous grosgrain ribbon is secured by two nickel grommets for a secure, comfortable fit.

C H A R A C T E R S:
Peppa Pig (3 Choices)
George Pig
Mummy Pig
Daddy Pig
Zoe Zebra
Suzy Sheep
Candy Cat
Pedro Pony
Emily Elephant
Rebecca Rabbit
Richard Rabbit
Danny Dog

S I Z E:
One size fits children and adults.

Q U A N I T Y:
Listing is for one crown in your choice of character.
Discounts given on orders of 6 or more crown. Send request.

S H I P P I N G:
All orders ship within 2 business days.
Free USPS First Class shipping.
Shipping upgrades available.

C U S T O M I Z A T I O N:
Felt and ribbon colors can be changed to suit your party theme.


>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Food Grade Mold (M101) - Happy Birthday Plaque/Design - Flexible Cake Decorating Mold - Reusable - The Art of Cake Decorating by SourceHelper

$
0
0

16.00 USD

SUGARCRAFT - Happy Birthday Plaque-design - The Art of Cake Decorating

Decorate your cakes or cookies using this "Happy Birthday" plaque design mold.

This mold is produced using a silicone system specially formulated for use in the food and confectionery industry and complies to FDA (Food and Drugs Agency) regulations in the USA.

This very fine detail and flexible mold is reusable.

Mold size: 3 1/2 x 2 3/8 inches

This mold is ideal for use with sugarpaste, flowerpaste, chocolate sugarpaste, marzipan, or melted chocolate.

Mold comes with simple instruction to use.

This mold is also suitable for craft applications and can be used with most mediums including paper clay, metal clay, fimo, resin and plaster. Once used with non-edible materials, we advice not to use with food products.


+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

We will ship your order usually within one business day after we receive you payment.

Contact us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.

To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper

Thank you - Sourcehelper.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

Packet of 12 x sheets of A4 coloured wafer paper - 'Foliage II' set by LaDolceVitaCakes

$
0
0

9.99 GBP

12 sheets of A4 wafer paper in a light 'leafy' green. Perfect soft shade for romantic flower leaves on wedding cakes.

This wafer paper is 0.44mm thick and printed with edible ink.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x

Carrot Cookie Cutter, Easter Cookie Cutter & Piping Bag Cookie Cutter Designed by The Painted Pastry - **Guideline Sketch to Print Below** by WhiskedAwayCutters

$
0
0

5.50 USD

This fun carrot cutter design is by Aime of The Painted Pastry as a set of three Easter cutters that she requested that we make in time for her Easter cookies this year. While working on it, I also saw a piping bag in the shape. You can find more of Aime's beautiful work at www.facebook.com/ThePaintedPastry. Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. This cutter design has one of our longest print times as a result of the curves and is priced accordingly.

Carrot and Piping Bag Cutter by The Painted Pastry comes in the following sizes with the height shown first:

3" x 1 1/8"
3 1/2" x 1 1/4"
4" x 1 3/4"
4 1/2" x 2"
5 3/8" x 2 3/8"

Guideline Sketches will be done shortly and added. To save them, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot cookies and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 business days on average. Priority Mail is listed as 2 - 3 business days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time before shipping that is shown. I will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.


Baroque silicone mould (mold) - 'Baroque Ribbon' by FPC Sugarcraft resin mold, fimo mold, polymer clay mold, soapmaking mold C196 by fpcsugarcraft

$
0
0

10.50 GBP

The decorations in this mould have been carved by hand from wax to add a touch of baroque elegance to your cakes. A scaled background is shown in the second image.

Like most of our moulds, this can be used equally well with other edible and non-edible media, such as Isomalt, Chocolate, Polymer Clay, Soap, Resin etc.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Nemo Birthday Crown - Finding Nemo Party Hat - Nemo Party Decorations by iCROWNyou

$
0
0

16.00 USD

Looking for something fun for your Nemo themed party? Well now you can get your party started with this adorable Nemo birthday crown.

Each crown is handcrafted using eco-fi felt and lined with a thick interfacing that allows this crown to withstand hours of fun! Two nickel grommets secure a generous grosgrain ribbon allowing your crown to adjust to any head size. Long after the party is over, these adorable crowns can be reused over and over again. The perfect party favor!

One crown per order. Discounts given on 6 or more. Please convo.

Not just for kids. ONE SIZE fits all.

Always FREE SHIPPING.

All copyrights and trademarks of the character images used belong to their respective owners and are not being sold. This item is not a licensed product and I do not claim ownership over the characters used.

a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Food Grade Mold (M76) - 15 Small Gem Design - Flexible Cake Decorating Mold - Reusable - The Art of Cake Decorating by SourceHelper

$
0
0

19.25 USD

SUGARCRAFT - 15 Small gem design - The Art of Cake Dressing

Decorate your cakes, cupcakes, or cookies using this gem design mold. This silicone mold will enhance your food decorating skill. Or you can use this mold to make various shapes of chocolates.

This mold is produced using a silicone system specially formulated for use in the food and confectionery industry and complies to FDA (Food and Drugs Agency) regulations in the USA.

This very fine detail and flexible mold is reusable.

Mold dimensions: 120 mm x 60 mm (approx. 4.70 inches x 2.36 inches)

Gem sizes: square about 3/4 inch x 3/4 inch

This mold is ideal for use with sugarpaste, flowerpaste, chocolate sugarpaste, marzipan, candy melts, or melted chocolate.

Mold comes with simple instruction to use.

This mold is also suitable for craft applications and can be used with most mediums including paper clay, metal clay, fimo, resin and plaster. Once used with non-edible materials, we advice not to use with food products.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

Susan's Wedding Dress Cookie Cutter by WhiskedAwayCutters

$
0
0

5.25 USD

This is the second of three cutters designed by Susan of They Call Me Sugar. You can find more of Susan's wonderful work at www.facebook.com/TheyCallMeSugar Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Susan's Wedding Dress comes in two sizes. Please choose from above under "Size" for either of the following:

2" x 1 3/4"
3 1/2" x 3 3/16"
4" x 3 3/4"
4 3/4" x 4 3/8"

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.re shop information.

Hummingbird silicone mould (mold) - 'Hummingbird' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold B021 by fpcsugarcraft

$
0
0

7.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

12 x sheets of A4 printed wafer paper - 'UNFORGOTTEN' set by LaDolceVitaCakes

$
0
0

9.99 GBP

12 sheets of A4 wafer paper 'UNFORGOTTEN' WRAPAROUND set. These patterns have been designed specifically for wrapping around cakes and have been patterned matched for a perfect, continuous flow. Written application tutorial included for free.

This wafer paper is 0.44mm thick and printed with edible ink. Also fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

SHEET GUIDE FOR APPLICATION OF WRAPAROUNDS ON ROUND CAKE TIERS

Please note this is a rough guide, calculated on the basis of Pi, using the length of A4 at 11.6” when in landscape position. [Whilst I have not measured allowing for excess circumference after fondant application, I have added an allowance within the 'sheets needed' column to ensure that you will have enough sheets to wrap your cake.]

CAKE WIDTH IN INCHES APPROXIMATE AMOUNT OF SHEETS NEEDED

16" 4.5
15" 4.25
14" 4
13" 3.75
12" 3.5
11" 3.25
10" 3
9" 2.75
8" 2.5
7" 2.25
6" 2
5" 1.75
4" 1.5

Sheets fit up to 8" in height (extended double barrel tiers).

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is NOT noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

Carrot Cookie Cutter, Easter Cookie Cutter & Piping Bag Cookie Cutter Designed by The Painted Pastry - **Guideline Sketch to Print Below** by WhiskedAwayCutters

$
0
0

5.50 USD

This fun carrot cutter design is by Aime of The Painted Pastry as a set of three Easter cutters that she requested that we make in time for her Easter cookies this year. While working on it, I also saw a piping bag in the shape. You can find more of Aime's beautiful work at www.facebook.com/ThePaintedPastry. Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. This cutter design has one of our longest print times as a result of the curves and is priced accordingly.

Carrot and Piping Bag Cutter by The Painted Pastry comes in the following sizes with the height shown first:

3" x 1 1/8"
3 1/2" x 1 1/4"
4" x 1 3/4"
4 1/2" x 2"
5 3/8" x 2 3/8"

Guideline Sketches will be done shortly and added. To save them, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot cookies and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 business days on average. Priority Mail is listed as 2 - 3 business days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time before shipping that is shown. I will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.


Deer silicone mold - 'Birch Silhouette' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C210 by fpcsugarcraft

$
0
0

13.00 GBP

A set of Birch Trees, branches, leaves, two birds on branches and a stag and doe silhouette. Use the motifs as silhouettes or paint in the details.

180mm x 120mm

We are pleased to offer you our high quality silicone moulds for sugarcraft cake decorations and other craft projects. Low cost worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in most of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

9 pcs - Screw clasps - barrel clasps - nonmetal clasps (plastic) by amber4you

$
0
0

8.80 USD

Plastic screw clasps.
Colors as in pictures.
Polished clasps

Size: ~ 15x7x7mm
Hole size is ~0.8mm.
1 inch = 25.4mm

You will receive 9 clasps.

If you need more clasps, other colors or have any questions do not hesitate to ask!

***
Color slightly varies due to you monitor calibration, source of light and background color. Photographed in indirect sunlight.
***
If you do not know how to use these clasps, check my blog:
http://oldknowledge.blogspot.com/2013/06/how-to-make-baltic-amber-teething.html
***
For news, updates and discounts... join me on facebook: http://www.facebook.com/pages/Baltic-Amber-4-you/177521085593145

Curious George Birthday Crown - Curious George Party Hat - Curious George Party Decor by iCROWNyou

$
0
0

16.00 USD

This Curious George birthday party hat will have your guests swinging from the trees!

Handcrafted with a fun Curious George fabric. Each crown is lined with a thick interfacing and backed with your color choice of eco friendly felt. These are sturdy crowns that will last through hours of celebrating and then can be used again and again for those who want to monkey around a little more.

Customize your crown with your child's age or choose "no age" during checkout.

Not just for little monkeys. These crowns come with a coordinating grosgrain ribbon that allows this birthday crown to adjust to fit adult monkey's too.

Listing is for one crown. Discount given for orders over 6, please convo.

All orders ship out within 48 hours.




>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Mini Plus/Extra Small Signature Plaques Cookie Cutters by WhiskedAwayCutters

$
0
0

4.50 USD

This listing is for our Signature Plaques in Mini Plus Size (or Extra Small, depending upon how you look at it). I find true minis to be too small to work with and prefer ones a bit larger, so thus we have the Mini Plus/Extra Small Plaque Series. They are available individually or as a set. Pricing is largely based on print time and although these are smaller than other cutters, the machines have to print slower due to the curves and thus they are priced as such. Here are the sizes for each in order from left to right starting from the top row:

The Trinnie - 1 3/4” x 2 1/4"
The Vicki – 2” x 2 1/8”
The Michelle - 1 3/4” x 2 1/4”
The Maryann Squared – 1 7/8” x 1 7/8”
The Jenn – 2” x 1 3/4”
The Miss McGoo 2 – 2 1/2” x 2 1/4"
The Miss McGoo – 2” x 2”
The Maryann – 1 3/4” x 2 1/4"

My plaque designs are named after my cookie friends. If you would like to see their wonderful work, here are the links to their pages:

The Trinnie - Trinnie Loves Cookies:
https://www.facebook.com/TLCTrinnieLovesCookies

The Vicki - Sweet Tweets:
https://www.facebook.com/vickisweettweets

The Michelle - Sweet Charity:
We are still trying to get her to start a page. She is shy. :0)

The Maryann & The Maryann Squared - The Cookie Artisan:www.flickr.com/photos/34555769@N04/

The Jenn - The Bluebonnet Bake Shoppe:
www.facebook.com/TheBluebonnetBakeShoppe

The Miss McGoo and The Miss McGoo 2 - Arty McGoo:
www.artymcgoo.blogspot.com

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Frames silicone mould (mold) - 'Picture Frames' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C141 by fpcsugarcraft

$
0
0

10.50 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Viewing all 11345 articles
Browse latest View live




Latest Images