19.00 USD
Aime of The Painted Pastry and I were going to wait to show you her other version of her cutter that works as a barn, bakery, schoolhouse, gingerbread house, Santa’s Workshop, church, cute house and more once she had a cookie to show with it, but Mr. Whisked Away Cutters did a graphic for us! So, ta da! It comes in 3d! I love how she designed it with overhangs for icicles or trees as well! You can find more of her wonderful work at www.facebook.com/ThePaintedPastry
This 3d version comes in three main series options based upon the sizing of the main front/back cutter. Your house will be a bit taller than that height when the roof is added with your dough thickness for that piece. The cutters are priced lower than they should be for the print time in order to keep the cost of the sets down as much as possible. Shipping is reflected for this set of 4 - 5 cutters. To purchase just the main cutter alone or that with the window cutout, you can find that with lower shipping as it is only 1 - 2 pieces here: https://www.etsy.com/listing/205524825/barn-house-bakery-school-gingerbread?ref=shop_home_active_4
Please choose from the selections above for any of the following sets:
___________________________________________________________________________
**OPTION 1 SERIES - This is sized for the House with the Front/Back at 3" tall x 3 1/8" wide. It will be a bit taller with the roof added
*Option 1A:
4 pieces:
Front/Back at 3" tall x 3 1/8" wide
Wall: 2 3/8" x 1 1/2"
Roof 1: 2 1/8" x 1 5/16"
Roof 2: 2 1/8" x 1 3/8"
*Option 1B: This is Option 1A with an added 7/8" x 5/8" cutter for window cutouts
To purchase just the main barn, etc. cutter, you can purchase that at lower shipping as it is just 1 - 2 cutters compared to the full set of 4 - 5 cutters with this listing:
https://www.etsy.com/listing/205524825/barn-house-bakery-school-gingerbread?ref=shop_home_active_4
______________________________________________________________
**OPTION 2 SERIES - This is sized for the House with the Front/Back at 3 1/2" tall x 3 3 5/8" wide. It will be a bit taller with the roof added
*Option 2A:
4 pieces:
Front/Back at 3 1/2" tall x 3 3 5/8" wide
Wall: 2 3/4" x 1 3/4"
Roof 1: 2 1/2" x 1 5/8"
Roof 2: 2 1/2" x 1"
*Option 2B has all of Option 2A with an added 7/8" x 5/8" cutter for window cutouts
To purchase just the main barn, etc. cutter, you can purchase that at lower shipping as it is just 1 - 2 cutters compared to the full set of 4 - 5 cutters with this listing:
https://www.etsy.com/listing/205524825/barn-house-bakery-school-gingerbread?ref=shop_home_active_4
_____________________________________________________________
**OPTION 3 SERIES - This is for the set for a 3d House with the Front/Back at 4" tall x 4 1/2" wide. It will be a bit taller with the roof added
*Option 3A -
4 pieces:
Front/Back at 4" tall x 4 1/2" wide
Wall: 3 1/2" x 2""
Roof 1: 2 3/4"" x 1 3/4"
Roof 2: 2 3/4" x 1 1/8"
*Option 3B has all of Option 3A with an added 1 1/4" x 13/16" cutter for window cutouts
To purchase just the main barn, etc. cutter, you can purchase that at lower shipping as it is just 1 - 2 cutters compared to the full set of 4 - 5 cutters with this listing:
https://www.etsy.com/listing/205524825/barn-house-bakery-school-gingerbread?ref=shop_home_active_4
___________________________________________________________________________
I am including two Guideline Sketches should anyone wish to use them as a guide. Aime of The Painted Pastry provided the artwork for the barn and I did one for the bakery/sweet shop. You will find them each under the photos of the cutter. To save either, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed, print it to follow or place it on a KopyKake.
Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.
** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.
Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"
Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.
Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.