Quantcast
Channel: Shops recently added to CounterFitCakes'
Viewing all 11301 articles
Browse latest View live

Paw Patrol Iron On Patch - Paw Patrol Applique - Ready to Ship by iCROWNyou

0
0

6.99 USD

Paw Patrol embroidered, iron on applique patch. Ready to ship!
Adheasive backed embroidered patch that can be ironed on or stitched on.

Easy to apply on apparel.
Great for patching up holes, adding to bags as fun decoration.
Add a creative touch to clothing, towels, blankets and more.

Ready to ship.

Shipping just .99 cents!
Patch measures 2.75" H x 3.25" W



** The Copyright image of the patch belongs to their respective copyright holders.
iCrown You does not own or claim ownership of these images.**


Whale and Bird Cookie Cutter and Fondant Cutter Designed By Whisked Away Cutters - **Guideline Sketches to Print Below** by WhiskedAwayCutters

0
0

5.50 USD

When my friend, Nicole, of Salsa Sweets asked me to designed a cute chubby whale with a mermaid shaped tail, lickety split I pulled out another whale design that I had done, made a few modifications and viola! She was all set! I always show my friend Vicki of Sweet Tweets what I am working on and she immediately pointed out that it was a bird. Admittedly, I was so focused on getting the whale done that I hadn't even seen that! I then showed my whale to my friend Callye of Sweet Sugar Belle and lo and behold, not only did she tell me that she saw a bird, she sent the artwork for a guideline sketch to show it.

Whale and Bird Cutter comes in four sizes which can be selected from above:

2" x 1 1/2"
3" x 2 1/2"
3 1/2" x 2 3/4"
4" x 2 7/8"

Guideline Sketches will be posted tomorrow, July 22 as I need to finalize them. You will find them under the photos of the cutter. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and place it on a KopyKake or alongside your cookie as you pipe.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Woodland silicone mould (mold) - 'Woodland Animals' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C192 by fpcsugarcraft

0
0

12.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Paw Patrol Iron On Patch - Paw Patrol Applique - Ready to Ship by iCROWNyou

0
0

6.99 USD

Paw Patrol embroidered, iron on applique patch. Ready to ship!
Adheasive backed embroidered patch that can be ironed on or stitched on.

Easy to apply on apparel.
Great for patching up holes, adding to bags as fun decoration.
Add a creative touch to clothing, towels, blankets and more.

Ready to ship.

Shipping just .99 cents!
Patch measures 2.75" H x 3.25" W



** The Copyright image of the patch belongs to their respective copyright holders.
iCrown You does not own or claim ownership of these images.**

Horse by Sweet Sugar Belle Cookie Cutter & Fondant Cutter - Tutorial Link Below by WhiskedAwayCutters

0
0

5.00 USD

Next up in our series of cookie cutters designed by Callye of SugarBelle's, we have her iconic horse face, made from her original cutter drawing that she kindly sent for us to create and certain to make young cowpokes smile. Her full tutorial on how to decorate this adorable cookie can be found at http://www.sweetsugarbelle.com/2013/05/horse-face-cookies/

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Art Nouveau mould (silicone mold) - 'Art Nouveau Faces' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C195 by fpcsugarcraft

0
0

13.00 GBP

This mould has been created with antique brass findings, which would originally have been used to decorate pieces of furniture. These beautiful faces can now adorn your cakes and add a touch of timeless class. A scaled background is shown in the second image.

Like most of our moulds, this can be used equally well with other edible and non-edible media, such as Isomalt, Chocolate, Polymer Clay, Soap, Resin etc.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Dr. Suess Birthday Crown - Cat in The Hat Party Hat - Smash Cake Photo Prop by iCROWNyou

0
0

16.00 USD

A fun and whimsical Dr. Seuss inspired birthday crown in a cheerful Cat in the Hat fabric. This crown is so much fun to wear while your young reader is listening too (or reading) his favorite Dr. Seuss story and of course they are perfect for birthday's too! Many reasons to wear them and the best part is that they can be used over and over again.

I Crown You crowns are handcrafted using a collection wonderful fabrics. Each are lined with a thick interlining and backed with eco friendly felt. Two nickel grommets secure a generous grosgrain ribbon that allow this fantastic crown to adjust to any head size ... giving it a custom, comfortable fit.

Made for comfort, made to last and made for fun! Designed and hand crafted in Southampton, New York.

One crown per order. Discounts given on 6 or more. Please convo.

Always FREE SHIPPING.

*** PLEASE NOTE: This is not a licensed Dr. Seuss Enterprise product.
It is, however, handcrafted from licensed Robert Kaufman fabric.
I am not affiliated with or sponsored by Dr. Seuss Enterprise or Robert Kaufman Fabrics.

a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Wafer Paper Anemone by JessiesConfectionery

0
0

10.00 USD

Listing is for one, made to order, anemone-type flower (white flower petals, black center).

Wafer paper petals
Fondant center with plastic pearl stamens (non-edible)

Size varies because each flower is created individually, and will be between 3-5 inches in diameter and about 1 inch high.

***Creation time requires minimum of 1 week, not including shipping. If you require the item sooner, please contact me first!***


Apple Cookie Cutter and Fondant Cutter Designed by The Painted Pastry - **Guideline Sketch to Print Below** by WhiskedAwayCutters

0
0

5.50 USD

For Fall, Teacher Appreciation or Back to School cookies, we have this cute Apple Cutter design by Aime of The Painted Pastry. You can find more of Aime's delightful work at www.facebook.com/ThePaintedPastry

I will be adding a Guideline Sketch soon should anyone wish to use it as a guide. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Polymer clay silicone mould (mold) - 'Tiny Decorations' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C109 by fpcsugarcraft

0
0

10.50 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Paw Patrol Iron On Patch - Paw Patrol Applique - Ready to Ship by iCROWNyou

0
0

6.99 USD

Paw Patrol embroidered, iron on applique patch. Ready to ship!
Adheasive backed embroidered patch that can be ironed on or stitched on.

Easy to apply on apparel.
Great for patching up holes, adding to bags as fun decoration.
Add a creative touch to clothing, towels, blankets and more.

Ready to ship.

Shipping just .99 cents!
Patch measures 2.75" H x 3.25" W



** The Copyright image of the patch belongs to their respective copyright holders.
iCrown You does not own or claim ownership of these images.**

Pack of 12 x A4 sheets of printed wafer paper - 'Valentines' WRAPAROUNDS by LaDolceVitaCakes

0
0

9.99 GBP

12 sheets of A4 wafer paper 'Valentines' WRAPAROUND set. These patterns have been designed specifically for wrapping around cakes and have been patterned matched for a perfect, continuous flow. Written application tutorial included for free.

This wafer paper is 0.44mm thick and printed with edible ink. Also fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

SHEET GUIDE FOR APPLICATION OF WRAPAROUNDS ON ROUND TIERS

Please note this is a rough guide, calculated on the basis of Pi, using the length of A4 at 11.6” when in landscape position. [Whilst I have not measured allowing for excess circumference after fondant application, I have added an allowance within the sheets needed column to ensure that you will have enough sheets to wrap your cake.]

CAKE WIDTH IN INCHES APPROXIMATE AMOUNT OF SHEETS NEEDED

16" 4.5
15" 4.25
14" 4
13" 3.75
12" 3.5
11" 3.25
10" 3
9" 2.75
8" 2.5
7" 2.25
6" 2
5" 1.75
4" 1.5

Sheets fit up to 8" in height extended tiers.


I can offer customised sets therefore if you would prefer a set with 12 sheets of just one of the patterns in the set shown then just let me know and I will produce that for you.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is NOT noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!

Susan's Wedding Dress Cookie Cutter by WhiskedAwayCutters

0
0

5.25 USD

This is the second of three cutters designed by Susan of They Call Me Sugar. You can find more of Susan's wonderful work at www.facebook.com/TheyCallMeSugar Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Susan's Wedding Dress comes in two sizes. Please choose from above under "Size" for either of the following:

2" x 1 3/4"
3 1/2" x 3 3/16"
4" x 3 3/4"
4 3/4" x 4 3/8"

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.re shop information.

Leaves silicone mould (mold) - 'Decorative Leaves' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold C147 by fpcsugarcraft

0
0

10.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

1 pcs - Screw clasps - barrel clasps - nonmetal clasps (plastic) by amber4you

0
0

1.40 USD

Plastic screw clasps.
Colors as in pictures. Orange egg yolk color.

Size: ~ 15x7x7mm
Hole size is ~0.8mm.
1 inch = 25.4mm

You will receive 5 clasps.

If you need more clasps, other colors or have any questions do not hesitate to ask!

***
Color slightly varies due to you monitor calibration, source of light and background color. Photographed in indirect sunlight.
***
If you do not know how to use these clasps, check my blog:
http://oldknowledge.blogspot.com/2013/06/how-to-make-baltic-amber-teething.html
***
For news, updates and discounts... join me on facebook: http://www.facebook.com/pages/Baltic-Amber-4-you/177521085593145


Felt Owl Mask - Halloween Owl Costume - Pretend Play Costume - Owl Party Masks by iCROWNyou

0
0

10.00 USD

This felt owl mask is the perfect pretend play accessory for big imaginations. Use them for Halloween,school plays, pretend play, parties ... wherever fun and adventure is wanted.

Made with two layers of Eco-friendly felt and lined with a thick interfacing. This owl mask is very sturdy and is made to use over and over again.

All I Crown You masks boast playful designs, extra large eye openings (better to see you with my dear), nickel grommets and elastic to keep them in place. Soft, comfortable and one size to fit all.

C O L O R S:
Choose from the list above or create your own by selecting "Custom Colors" and add your colors during checkout.

S I Z E:
One Size Fits All

S H I P P I N G:
Orders ship within 3 days and as always, FREE DOMESTIC SHIPPING?

Listing is for one mask. Discounts given on 4 or more. Please convo.



a SWEET MONICA CELEBRATIONS design, copyrighted, 2014-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Packet of 12 x sheets of A4 coloured wafer paper - English rose WRAPAROUND SET by LaDolceVitaCakes

0
0

9.99 GBP

12 sheets of A4 wafer paper 'English Rose' set. These designs are continuous in nature and suitable for pattern matching and wrapping around your cake tiers. Comes with free written application tutorial.

Set contains x 2 of each design and there are 6 designs in the set.

This wafer paper is 0.44mm thick and printed with edible ink. Fantastic for making wafer paper flowers, side panels, wraparounds, bunting and other decorations for your cake and cupcake creations!

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

TOP TIP! How to apply neatly in strips to the side of your cake (as used on my teacup cake) -

Firstly, cut your strips to the desired width (tip: you can use a paper trimmer, or ruler and xacto knife to make the process faster – time is money ppl!).

Next, roll out a very thin piece of gumpaste, you are going to use this to back your stripes on to so as big a piece as you dare roll out! A light coloured gumpaste is best, you don’t want it to show through the fine wafer paper. I used blush pink fondant to cover this cake so used the same colour for the gumpaste backing.
Working quickly but carefully, brush a thin but EVEN layer of piping gel to the back of your strips (I usually work with around 5 at a time, mainly because my rolled out piece of gumpaste is never that big and that’s all I can fit on to it, (lazy I know, but hey I get bored once it gets to around a 10” wide ‘blob’ – technical term). Once you’ve got the babies coated in the gel, stick them to the gumpaste and when you have as many as you can fit on, turn the gumpaste sheet upside down and run your smoother over the underside (which is now the upside) to ensure that those little strips cant curl at the edges, you can also place something flat and slightly heavy on top to weigh it down, like a work board (I know it’s tempting but don’t sit on it to flatten he he). I usually start rolling another piece of gumpaste whilst I’m waiting for them to dry a little for a few minutes.
Turn your original gumpaste ‘sheet’ upright and cut around the edge of the strips that are glued on, and now they have a thin gumpaste backing, then apply the gumpaste backed wafer paper strips to your cake using piping gel (it’s out already, might as well use it!), or edible glue etc. Repeat with other strips and gumpaste. Voila! nice neat pretty and even stripes with no worries :-) Sounds like a long process but I find it’s actually faster then cutting normal plain gumpaste strips to candy stripe a cake, wafer paper strips never go wonky like those pesky plain gumpaste ones as they are sturdier and hold their shape ;-)

La Dolce Vita Cakes x

Acorn Cookie Cutter and Fondant Cutter Designed by Callaway - **Guideline Sketches to Print Below** by WhiskedAwayCutters

0
0

5.25 USD

A whimsical acorn for your Fall cookie needs! This is one of many cutter designs that I have collaborated on with my friend, Callye, and we had such fun doing this one, going back and forth with tweaking to get it just as we wanted it and to give it that perfect whimsical feel that we had in mind. We hope that you like it! It also pairs very nicely with the Squirrel Cutter that I designed as well as the Fall Leaf, another Callaway design.

Acorn Cookie Cutter Designed by Callaway comes in the following sizes:
2" x 1 1/2"
3" x 2 1/4"
3 1/2" x 2 5/8"
4" x 3"

I will be adding the Guideline Sketches soon should anyone wish to use them as a guide. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Hummingbird silicone mould (mold) - 'Hummingbird' by FPC Sugarcraft | resin mold, fimo mold, polymer clay mold, soapmaking mold B021 by fpcsugarcraft

0
0

7.00 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

1 pcs - Screw clasps - barrel clasps - nonmetal clasps (plastic) by amber4you

0
0

1.40 USD

Plastic screw clasps.
Colors as in pictures. Orange egg yolk color.

Size: ~ 15x7x7mm
Hole size is ~0.8mm.
1 inch = 25.4mm

You will receive 5 clasps.

If you need more clasps, other colors or have any questions do not hesitate to ask!

***
Color slightly varies due to you monitor calibration, source of light and background color. Photographed in indirect sunlight.
***
If you do not know how to use these clasps, check my blog:
http://oldknowledge.blogspot.com/2013/06/how-to-make-baltic-amber-teething.html
***
For news, updates and discounts... join me on facebook: http://www.facebook.com/pages/Baltic-Amber-4-you/177521085593145

Viewing all 11301 articles
Browse latest View live




Latest Images