Quantcast
Channel: Shops recently added to CounterFitCakes'
Viewing all 11354 articles
Browse latest View live

Pack of 12 x A4 sheets of printed wafer paper - 'Pretty Peonies' WRAPAROUNDS by LaDolceVitaCakes

$
0
0

9.99 GBP

12 sheets of A4 wafer paper 'Pretty Peonies' WRAPAROUND set. These patterns have been designed specifically for wrapping around cakes and have been patterned matched for a perfect, continuous flow. Written application tutorial included for free.

This wafer paper is 0.44mm thick and printed with edible ink. Also fantastic for making wafer paper flowers, side panels, bunting and other decorations for your cake and cupcake creations!

SHEET GUIDE FOR APPLICATION OF WRAPAROUNDS ON ROUND TIERS

Please note this is a rough guide, calculated on the basis of Pi, using the length of A4 at 11.6” when in landscape position. [Whilst I have not measured allowing for excess circumference after fondant application, I have added an allowance within the sheets needed column to ensure that you will have enough sheets to wrap your cake.]

CAKE WIDTH IN INCHES APPROXIMATE AMOUNT OF SHEETS NEEDED

16" 4.5
15" 4.25
14" 4
13" 3.75
12" 3.5
11" 3.25
10" 3
9" 2.75
8" 2.5
7" 2.25
6" 2
5" 1.75
4" 1.5

Sheets fit up to 8" in height extended tiers.


I can offer customised sets therefore if you would prefer a set with 12 sheets of just one of the patterns in the set shown then just let me know and I will produce that for you.

For ideas feel free to check out my instagram page - ladolce_vitacakes :-)

For international buyers, if you cannot see your postage listed, please send me a message for a quote.

La Dolce Vita Cakes x




Please note - wafer paper is not the same as icing/frosting sheets. It is mostly made up from potato starch and my printed wafer paper being 0.4mm thin (the thickness most commonly used for flowers, cake wraps etc) means that there may be some inconsistencies with the thickness of the paper over each sheet, resulting in some areas being more translucent than others, and you may sometimes notice a slight appearance of some patchiness. It is not a printing error but instead the nature of the delicate wafer paper itself (believe me, I've tried and tested most on the market and it happens to all of them!). It is so fine and some areas will allow light to pass through more than others This is NOT noticeable when backed onto fondant/gumpaste or when made into flower petals etc either. If you are looking for a materials with no imperfections than wafer paper may not be the material for you. I kind of feel it adds to the beautiful vintage vibe and love it just the same, I hope you do too :-))

Wafer paper keeps for around a year when kept in a sealed plastic bag. Keep away from moisture and sunlight.

If you have any questions please send me a message and I will be happy to help!


LorAnn Oils BAKERY EMULSION 4 oz, you pick the flavor(s), better than extract, won't bake out by theicingelf

$
0
0

4.95 USD

LorAnn Bakery Emulsion, 4 oz. bottle, new/sealed.

You pick the flavor(s).

Great for cakes, cookies, frosting, fillings, and desserts.

Use in any recipe as you would an extract - and experience better results!
More Flavorful than an Extract - Won’t Bake-Out

When it comes to flavoring, professional bakers almost exclusively use emulsions over alcohol-based extracts. Ideal for flavoring all your homemade baked goods, icings, fondants, and fillings.

* Use LorAnn Emulsions in place of an extract
* 1 teaspoon emulsion = 1 teaspoon extract
* Gluten-free, water-based flavors
* Kosher certified (except Pumpkin Spice Flavor)

Packaged in BPA free, recyclable PET plastic bottles (except Almond which is in glass).

20 Flavors Available:
Almond flavor
Banana Flavor
Blueberry Flavor
Butter Vanilla Flavor
Butter, Natural Flavor (clear)
Buttery Sweet Dough Flavor (rich taste of creamery butter combined with a hint of citrus and vanilla)
Cinnamon Spice (New flavor!)
Coconut Flavor
Coffee, Natural Flavor
Cream Cheese Flavor
Hazelnut Flavor
Lemon, Natural Flavor
Orange, Natural Flavor
Peppermint, Natural Flavor
Princess Cake and Cookie Flavor (light, nutty taste accented with undertones of citrus and rich vanilla)
Pumpkin Spice Flavor
Raspberry Flavor
Red Velvet Flavor (adds red velvet flavor and color in one easy step. Mix 1 oz. to cake mix batter)
Rum Flavor
Strawberry Flavor



LorAnn Oils Awarded Global Certification as Safe Quality Food Manufacturer

LorAnn Oils, Inc. manufacturer and world-wide distributor of premium flavorings for candy, baking and ice cream, was recently awarded Safe Quality Food (SQF) Level 2 Certification. The rigorous certification process guarantees LorAnn Oils meets international safety and quality standards recognized by the Global Food Safety Initiative (GRSI)

The Maryann Squared Cookie Cutter - Five Sizes - Blue by WhiskedAwayCutters

$
0
0

5.50 USD

This listing is for The Maryann Squared. Whisked Away Cutters currently come in two colors right now, Aqua and Blue, and this listing is for Blue. Please choose from above under "Size" for either of the following:

The Maryann Squared comes in these five sizes:
Large 3 3/8"
Medium Plus 3 1/8"
Medium 2 7/8"
Small 2 5/8"
X Small 2 3/8"

My plaque cutters are named after my friends and this one is ""The Maryann Squared", named after one of my absolutely dearest friends, Maryann, The Cookie Artisan. As plaque shapes are commonly used for message cookies and she was the first one to pioneer message cookies many years ago, I created the original The Maryann back in 2012 to take to her and our other friends at Cookie Con. The original is a rectangular shape and when I drew it out, I also made one in a squarish version, which you see here. You can find Maryann's incredible creative and wonderfully fun work at www.flickr.com/photos/34555769@N04/ . We are nudging her to get on Facebook, so hopefully that will happen in the near future.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

The Very Hungry Caterpillar Party Crowns - Hungry Caterpillar Birthday Decorations - Hungry Caterpillar Smash Cake by iCROWNyou

$
0
0

16.00 USD

This fun birthday crown is beautifully crafted for the classic The Very Hungry Caterpillar party theme. With it's great styling and quality craftsmanship, this crown is sure to be a favorite. Perfect to use as special party favors or when reading about the Hungry Caterpillar adventures. Of course, what guest of honor wouldn't feel special with there very own crown!

Made with your choice of fabric. Each crown is lined for durability and backed with your choice of coordinating felt. A generous grosgrain ribbon is secured by two nickel grommets that gives this crown a comfortable fit, allowing it to fit any head size.

Soft, comfortable and sturdy. Can be used over and over again ... that's right reusable!

If you would like a number or name added to your crown please use this listing:
https://www.etsy.com/listing/238297598/crown-add-ons?ref=shop_home_active_1


Listing is for one crown. Discounts given on six or more. Please convo.

**Orders shipped within 48 hours via USPS Parcel Post. Insurance included.** Please be aware of Post Office closings when calculating delivery time.



PLEASE NOTE:

I Crown You crowns are handcrafted by me using a collection of Eric Carle fabrics.This is not a licensed Eric Carle Andover product. It is, however, hand-crafted from licensed Andover fabric.
I am not affiliated with or sponsored by Eric Carle Studios or Andover.
_______________________________________________

>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

The Jenn Plaque Cookie Cutter and Fondant Cutter by WhiskedAwayCutters

$
0
0

8.00 USD

This listing is for The Jenn. Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. The Jenn is one such shape due to the intricacy of the curves. Please choose from above under "Size" for either of the following:

The Jenn comes in these two sizes:
Large 3 1/2" x 3" with a center rectangle of 3" x 2 1/2"
Medium 3" x 2 3/4" with the center rectangle measuring 2 3/4" x 2 1/4".

My plaque cutters are named after my friends this one is "The Jenn", named after my dear friend, Jenn of The Bluebonnet Bake Shoppe. Jenn sent me the concept drawing and then together we tweaked it to what you see. Pricing to follow.This cutter has a fun, whimsical touch, just like her namesake's delightful work, which can be found at www.facebook.com/TheBluebonnetBakeShoppe

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Silicone mould (mold) - 'Fox' by FPC Sugarcraft by fpcsugarcraft

$
0
0

8.50 GBP

Make fabulous nature inspired cakes and craft projects with this easy to use Fox mould from FPC Sugarcraft.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Tall Pumpkin 1 Cookie Cutter and Fondant Cutter - Three Sizes - **Two Guideline Sketches to Print Below** by WhiskedAwayCutters

$
0
0

5.00 USD

As I had a request from a customer to design a tall pumpkin, here he is! This cutter is tall and skinny and for a pumpkin cookie with character!

Tall Pumpkin 1 comes in three sizes. Choose from the selections above for any of the following:

3" x 1 3/4" (this is a small cutter as it is narrow at the top)
3 1/2" x 2"
4" x 2 1/4"

I am including two Guideline Sketches should anyone wish to use them as as guide. You will find them under the photos of the cutter. To save them, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

STUNNING Vintage AB Pink Purple Rhinestone Silvertone Floral Brooch by Lavendergems

$
0
0

18.00 USD

This beautiful vintage rhinestone brooch features large emerald cut rhinestones of pink and purple, a rounch center pink rhinestone and then encircling the brooch and center rhinestone are small Aurora Borelis stones.
The stones are set in a layered pattern and are all prong set in a silver tone finish.

The brooch is 2 inches in diameter. All stones are present and are clear with lots of sparkle.
Excellent vintage condition.

Ready to Wear and will look great with any outfit.


22pcs - Natural Baltic amber beads, beads with cracks, polished beads, white amber, oval, royal Baltic amber, 7-10 mm at widest part (#22) by amber4you

$
0
0

5.90 USD

Natural Baltic amber beads.
Polished beads. Light yellow and white color.
Same beads as in photos.
NOTICE: almost all beads have crack along a bead or few cracks. Most of them fit for projects where only one side is visible very well.

SIZE:
The biggest bead: 10x6x4mm
The smallest bead: 7x5x5mm.
1 inch = 25.4mm

You will receive 22 pieces of natural Baltic amber.

_________
You will receive SAME beads as in photos!

Color slightly varies due to you monitor calibration, source of light and background color. Photographed in indirect sunlight.
_________
SHIPPING:
Shipping is always 5$ in my shop, no matter where you live. No additional fees for additional items.
Shipping with registered priority mail (airmail with registration number) from Lithuania, Baltic coast, Europe.
_________
Amber is not a stone, nor a crystal. Amber is fossil resin, which age is about 40 million years. It is warm to touch and very well known for its healing abilities.
_________
Join me on facebook: http://www.facebook.com/pages/Baltic-Amber-4-you/177521085593145
Visit my blog: http://www.oldknowledge.blogspot.com

Custom Order for Samantha by iCROWNyou

$
0
0

14.00 USD

Purple crown with pink lettering.
"Kids are the Boss"

Katrina Barrow Custom Order by theicingelf

$
0
0

9.00 USD

Peter Rabbit and Friends custom image wafer papers, two uncut sheets.

Bird and Leaf Cookie Cutter & Fondant Cutter by The Painted Pastry by WhiskedAwayCutters

$
0
0

5.50 USD

This adorable bird comes to us from the very talented Aime of The Painted Pastry who designed this cutter to be both a charming bird or a leaf. You can find Aime's wonderful work at www.facebook.com/ThePaintedPastry.

Bird and Leaf Cutter by The Painted Pastry comes in the following three sizes which can be selected from above:

3" x 1 5/8"
3 1/2" x 1 7/8"
4" x 2 1/8"

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Current processing time prior to shipping is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed and please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Silicone mould (mold) - 'Steampunk Cogs & Gears' by FPC Sugarcraft by fpcsugarcraft

$
0
0

10.50 GBP

High quality silicone moulds for sugarcraft cake decorations and other craft projects. Worldwide shipping, with free delivery in the UK.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

An indication of the product size in shown in all of our product images. The background grid shows squares 1cm x 1cm (approximately 0.4in x 0.4in). Please note that whilst every care is taken to ensure the accuracy of scale in these images, all dimensions should be considered for guidance only.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

The Very Hungry Caterpillar Party Crowns - Hungry Caterpillar Birthday Decorations - Hungry Caterpillar Smash Cake by iCROWNyou

$
0
0

16.00 USD

This fun birthday crown is beautifully crafted for the classic The Very Hungry Caterpillar party theme. With it's great styling and quality craftsmanship, this crown is sure to be a favorite. Perfect to use as special party favors or when reading about the Hungry Caterpillar adventures. Of course, what guest of honor wouldn't feel special with there very own crown!

Made with your choice of fabric. Each crown is lined for durability and backed with your choice of coordinating felt. A generous grosgrain ribbon is secured by two nickel grommets that gives this crown a comfortable fit, allowing it to fit any head size.

Soft, comfortable and sturdy. Can be used over and over again ... that's right reusable!

If you would like a number or name added to your crown please use this listing:
https://www.etsy.com/listing/238297598/crown-add-ons?ref=shop_home_active_1


Listing is for one crown. Discounts given on six or more. Please convo.

**Orders shipped within 48 hours via USPS Parcel Post. Insurance included.** Please be aware of Post Office closings when calculating delivery time.



PLEASE NOTE:

I Crown You crowns are handcrafted by me using a collection of Eric Carle fabrics.This is not a licensed Eric Carle Andover product. It is, however, hand-crafted from licensed Andover fabric.
I am not affiliated with or sponsored by Eric Carle Studios or Andover.
_______________________________________________

>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

The LilaLoa Plaque Cookie Cutter - One Size - Blue or Aqua by WhiskedAwayCutters

$
0
0

8.00 USD

This listing is for The LilaLoa in 2 1/4" x 4 1/2". Whisked Away Cutters currently come in two colors, Aqua and Blue. This listing is for Blue or Aqua, depending upon available stock.

My plaque cutters are named after my friends and this one is "The LilaLoa", named after my very creative thinks-outside-of-the-box friend, Georganne of LilaLoa. When I asked her if she would like to be a plaque cutter, she immediately had a design in mind that would be perfect for the name "The LilaLoa". "LilaLoa" means "long and thin" in Hawaiian, so this is quite apropos! You can find Georganne's teaching blog as well as her work at www.lilaloa.com/ and on Facebook at www.facebook.com/LilaLoaCookies

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters. Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.


Silicone mould (mold) - 'Sugar Skull' by FPC Sugarcraft by fpcsugarcraft

$
0
0

10.00 GBP

A high quality silicone mould created from our own 3D print of a Sugar Skull with customisable banner. The mould impression measures 12cm x 8cm and features plenty of fine detail for you to colour as you wish. The finished impression when made in our recommended mix of sugarpaste can be laid flat or curved around the edge of a cake as shown in the product images.

FPC Sugarcraft is a family run business producing sugarcraft moulds, based in Bristol, UK. The majority of our designs are hand sculpted by us in wax relief, with a few designs derived from found items, so hopefully you will not find our designs anywhere else - beware of imitations!

We are pleased to offer you our range of unique high quality silicone moulds, for cupcake and celebration cake decorations and many kinds of craft projects. All of our moulds are designed and manufactured in-house from soft, flexible platinum-cured silicone, ideally suited for moulding sugarpaste decorations.

Other foodstuffs and other modelling materials may be used in our moulds, including wax, soap, Fimo/Sculpey and PMC. The silicone material can withstand relatively high temperatures for short periods (up to 250ºC/480ºF) and possesses inherently good release properties, making demoulding trouble free.

The moulds are shown with examples of finished, painted sugarpaste impressions that can be made using them. The coloured impressions are for illustration purposes only and are not included in the offer of sale.

Gold Metal Filigree Cuff Bracelet with Faux Pearls and Green Stone - Vintage 1960 by Lavendergems

$
0
0

5.00 USD

Gold Metal Filigree Cuff Bracelet with Faux Pearls and Green Stone - Vintage 1960

Presenting a Vintage Gold Tone Cuff bracelet with cut out work on the cuff of the bracelet. Attached to the cuff is a center piece with a green glass stone and swirl shapes on each side with faux pearls. This piece is bolted on to the cuff.

Measures 1" wide and 2 3/8" across.

Good Vintage condition - slight loss to metal at bottom of swirl

Felt Birthday Crown - Party Hats - Birthday Party Hats by iCROWNyou

$
0
0

12.00 USD

With so many color combinations to choose from, this classic styled birthday crown will be the talk of the party.

Each crown is handmade with two layers of eco-friendly felt and lined with thick interfacing. Two nickel grommets are added to secure a generous grosgrain ribbon that allow this crown to adjust to any head size. A secure, comfortable fit for all. These crowns are not flimsy. They have a high quality, thick feel and are durable enough to use over and over again. That's right ...reusable!

With so many colors to choose from you are sure to find the perfect combination.

Listing is for one crown. Discounts given on orders of 6 or more. Please convo.

********All orders are shipped within two days*******


____________________________________________
Happy crown customers said this:

***Just perfect - great high end materials (ribbon and felt) very well done - just love it

***These are great!! I didn't expect them to be so nice for the price. The quality was amazing and the best part was that my party guests kept them on!! Lot's of fun ... thanks Kate.
_______________________________________________
>>> a SWEET MONICA CELEBRATIONS design, copyrighted, 2011-2017 © all rights reserved ® my designs & photographs are the property of SWEET MONICA CELEBRATIONS, they may not be duplicated in whole or in part by any persons or entities without prior expressed consent by me, the creator. All items may not be resold without prior permission from SWEET MONICA CELEBRATIONS.

Reusable Clay Mold Making Oyumaru Only Use Hot Water Perfect for Short Clay Project (single color) - 1pkg (6pc) by SourceHelper

$
0
0

11.00 USD

Make your own clay molds, using only hot water. This will be one of your best purchases ever.
1 box 6 pcs single color (clear white, size: 5/8 x 1/4 x 2 1/4 inches per piece).

If you have never used Oyumaru before, watching this video will give you an idea on how easy it is to make your own mold: http://www.youtube.com/watch?v=vz8FwUEFMzY (this site is not related to sourceheleper in any way)

Great clay molding material which is re-usable, so you can keep using it for different mold shapes.

Perfect if you need to make lots of clay molds but only need to use each to create few copies. Picks up detail surprisingly well.

Dip a piece of the Oyumaru in hot water (approx: 80 degree C) for about 3 to 5 minutes. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel. While it is still soft, press the material you wish to mold into the Oyumaru.

If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.

Allow Oyumaru to cool down, remove your object and your mold is ready for your clay project. Oyumaru is re-usable.

Note: by the way, if you do not need this material anymore, you can make various 1:12 miniature items with this material

Please let me know if you are interested to purchase in quantity for re-sale in your area.

+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*
We will ship your order usually within one business day after we receive you payment.
Convo us for shipping cost if your country is not listed or if you have any question about the specification. No return nor refund after order has been shipped.
To see other items at our store, go here: http://www.etsy.com/shop/SourceHelper
Thank you - Sourcehelper.
+*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*++*+ +*

Fun Gingerbread Man Cookie Cutter & Fondant Cutter Designed by The Bearfoot Baker with Tutorial Link - **Guideline Sketch to Print Below** by WhiskedAwayCutters

$
0
0

6.25 USD

When I saw this absolutely adorable big footed gingerbread man with so much personality done by my friend, Lisa the Bearfoot Baker, I fell in love! I asked her if we could make him into a cutter and she loved the idea, so here he is! You can find Lisa's full tutorial on making him at http://thebearfootbaker.com/2014/11/fun-gingerbread-man-cookies/

I am including a Guideline Sketch should anyone wish to it as a guide. You will find it under the photos of the cutter. To save it, click on the photo, right click to either "Save Image" or "Copy Image". From there paste into Word or whichever program you like. You can then resize it from there as needed and then print it to either follow along or to place on a KopyKake.

Whisked Away Cutters are finely crafted cutters for cookies and fondant, designed by a cookie decorator for cookie decorators. Crafted with rounded corners on the handle for comfort, a reinforced area near the base of the handle and strong walls going down to a fine tapered edge for a precise, clean cut. Please see the cutter side view example in the close up photo of The Vicki plaque cutter shown above in the thumbnail photos.

** Food safe PLA cutters are HAND WASH ONLY, not dishwasher safe, cannot be used to cut hot and should not be left to soak in hot water. This is an aspect of all food safe PLA cutters. Care must be given to the specialized tapered cutting edge when storing as it can get nicked or damaged if hit with another cutter or sharp object. Proper care will ensure years of use from your Whisked Away Cutters.

Maryann, The Cookie Artisan, recently had this to say, "I love how your cutters feel in my hands and how comfortable the edges feel as I cut cookies! Used my first cutter to cut 350 cookies and the edges on the last cookie looked as great as the first cookie!"

Cutter prices are determined by print time and the amount of PLA used. Cutters with intricate shapes and curves or larger sizes take longer to print and are priced accordingly. This is one such design.

Current shipping time is shown on our home page beneath the banner at https://www.etsy.com/shop/whiskedawaycutters Shipping for our shop is done via USPS First Class Mail, which is listed as 3 - 5 days on average. Priority Mail is listed as 2 - 3 days on average and is available for purchase as a separate item. Again, shipping times are not guaranteed. Please bear in mind the normal order processing time that is shown. We will make all efforts to expedite your order when Priority Mail is selected, but it will be a matter of the number of orders already placed. Please see "Shipping & Policies" for more shop information.

Viewing all 11354 articles
Browse latest View live




Latest Images